3D Printing Stack Exchange
3D Printing Stack Exchange

Most Popular

more tags
1500 questions
4
votes
1 answer

Any family of plastics / filaments that bend and keep their shape?

Not asking for a product recommendation, unless there's only one product out there like this... I have a need for a flexible filament that retains its deformation, kind of like silly putty. Are there any filaments out there that, after you bend or…
K Mmmm
  • 1,702
  • 14
  • 33
4
votes
1 answer

How to create an accurate mask for a UV 3D resin DLP printer

The light of the build area of a DLP UV printer isn't evenly spread. The source of light is a 9 LED UV array. The light mainly falls of to the sides. This results in objects curing too much in the center, or not enough on the outer sides of the…
Mike de Klerk
  • 151
  • 6
4
votes
1 answer

Software for 3d model to arc/curve gcode?

Is there software that can take a solid model, e.g. in STEP format, and generate gcode that includes arc/curve commands (G2, G3, G5) when possible?
Roger
  • 261
  • 2
  • 6
4
votes
1 answer

Print slipped away

I try to configure my 3D Printer properly. I printed this boat model https://www.thingiverse.com/thing:2763854 (with a scaling of 0.6):The quality of the print looks nice but at the last roof the entire print slipped away. (e.g. no adhesion between…
james
  • 43
  • 4
4
votes
2 answers

Ramps 1.4 with a power brick

I'm currently designing a RepRap 3D printer that will not have a heated bed. I have heard that it is possible to use a power brick with commercial printers lacking heatbeds. Is this possible with a RepRap printer using a RAMPS board? I'm referring…
TECTEC3 Studios
  • 426
  • 2
  • 6
4
votes
2 answers

Threads for nozzle (Anet A6 extruder)

How do I know what nozzle to get for my Anet A6 printer? I want to get some hardened nozzles because I would love to print with some glow in the dark filament, but I know that eats up brass nozzles fast. But there is so many thread differences so I…
Ljk2000
  • 1,253
  • 2
  • 11
  • 21
4
votes
1 answer

Problem with print bed height on Creality Ender 4

I am a novice to 3D printing and have encountered an issue that I cannot seem to solve. Hopefully someone here can point me in the right direction. I have a Creality Ender 4 that I purchased a few months ago and up until about 4 weeks ago, it worked…
dusodesign
  • 49
  • 3
4
votes
1 answer

Temperature offset on Wanhao Duplicator i3 Mini

I'm trying to print with PLA on a new Wanhao Duplicator i3 Mini. In regular temperature settings (200-210°C) the printer underextrudes and the extruder motor skips, which led me to suspect low nozzle temperature. Increasing the temperature to 225°C…
insys
  • 149
  • 3
4
votes
1 answer

Plug sdramps module and Anet A8 LCD together into RAMPS smart adapter

I want to upgrade my Anet A8's motherboard (the stock one is broken anyway, see: Anet A8 reading 739°C from the extruder thermistor!) to the RAMPS 1.4, without having to get a new LCD/microSD module. I am thinking of getting both a smart adapter and…
Tooniis
  • 331
  • 3
  • 15
4
votes
1 answer

How to connect a NEMA 17 stepper to RAMPS 1.4?

I have an NEMA 17 stepper motor 17HS4401 and a RAMPS 1.4 driver unit. The motor pinouts are: RED A+ BLUE A- GREEN B+ BLACK B- while the RAMPS board has the following: 2B 2A 1A 1B Could someone point me in the right direction? How can I connect…
OrElse
  • 315
  • 3
  • 9
4
votes
3 answers

Why the Anet A6 can't do .05 layer height

So like I sayed in the title, Why can't the Anet A6 do .05 layer height? I found that some printers can do .05 layer heights, but the Anet A6 can't? I am interested to know if it is the stepper motors or the threaded rods or something. Maybe this is…
Ljk2000
  • 1,253
  • 2
  • 11
  • 21
4
votes
1 answer

MOSFET as a safety feature

When going through printer reviews, I often see the presence of a MOSFET listed as an important safety feature. I understand the MOSFET to be a transistor, but I haven't understood how it is used in the circuitry of a printer, and - above all - why…
mac
  • 4,715
  • 1
  • 13
  • 35
4
votes
2 answers

Any code to move up Z axis after finishing the printing?

Is the firts time that I saw this movement after the printing has finishig and causes the nozzle crashes to the printed part and I noticed due the part is 14x8 and the nozzle is to near and below to the border of the shape. I supposed that some…
Fernando Baltazar
  • 1,510
  • 3
  • 15
  • 21
4
votes
1 answer

Has anyone encountered this type of strange print patterns?

I am noticing strange print patterns ever since I upgraded to the Prusa multi material print head. The patterns are consistent printing upwards but inconsistent amongst each face. I am using original Prusa PLA filament, and have tried to…
user9868
  • 41
  • 2
4
votes
2 answers

Raft warping (Makerbot Replicator+)

Quick thing: Please tell me if I misuse any of the terminology On a replicator+, I have been printing successfully for a while, when suddenly the raft started to warp. I was doing a bunch of models that covered the whole tray, so I shrunk to just a…
Jake Faulkner
  • 43
  • 1
  • 6
1 2 3
…
99 100