1

Flashed Marlin to my Tronxy XY-2 Pro but two things are happening:

  1. I tried printing a rook but the print got shoved to the front left corner.

  2. X is way off to the right when it homes.

The computer homes the project to the center of the print bed but when push comes to shove #1 happens.

Is their anyway I can get the machine to start printing in the middle of the bed.

Using Cura slicer.

0scar
  • 35,554
  • 12
  • 65
  • 151
Ben Madison
  • 111
  • 2
  • 1
    This can be caused by either incorrect slicer settings (origin at center is notorious using Cura) or ["How to center my prints on the build platform? (Re-calibrate homing offset)"](/q/6375). If firmware related this question is a duplicate, please check your slicer settings first. Please provide additional information on Cura printer settings and possibly an image of sliced rook, and printed rook. Which firmware did you install, pre-compiled or self-configured? – 0scar Apr 15 '21 at 18:52
  • Thanks for the additions you added, but it still isn't enough to answer the question. Can you add a screenshot of the "Machine settings" window (showing the tab sheet called "Printer"). – 0scar May 18 '21 at 12:18

0 Answers0