3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [bigtreetech]

For bigtreetech displays, drivers, modules, motherboards.

41 questions
7
votes
1 answer

How to wire P.I.N.D.A. v2 to an SKR V1.3 board?

I bought a BigTreeTech SKR v1.3 main board and a P.I.N.D.A v2 for my P3Steel MGN. Does anyone know to wire them together and which part in Marlin 2 do I need to change?
Jack Iai
  • 71
  • 1
  • 1
  • 2
5
votes
3 answers

Noise cancelling Chiron Y-axis

I want to be able to run my Chiron during night-time, but my neighbours tries to sleep at that time of day. I have put a lot of effort into making the printer silent. The controller-fan and power-supply-fan now run slower and only when needed, I…
dotswe
  • 380
  • 1
  • 2
  • 10
4
votes
3 answers

Bigtreetech upload stalled after uncommented REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

I recently bought a BigTreeTech SKR V1.3 and uncommented REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and clicked the upload button but faced an error that says: Marlin\src\lcd\ultralcd.cpp:767:9: error: 'touch_buttons' was not declared in this…
William Jerome
  • 61
  • 2
3
votes
1 answer

BTT SKR Mini E3 V3 w/BTT smart filament sensor

I'm trying to figure out how to get my BTT Smart Filament sensor to work with my printer. I have looked at Getting BTT filament sensor to work and have tried almost everything they did. Relevant Specs about my printer: Ender 3 (not pro or…
Semperfi89
  • 61
  • 5
3
votes
1 answer

Steppers suddenly disabled during job

I'm using: Workbee CNC SKR1.4 Turbo with TMC5160 Marlin 2.0 Steppers suddenly disabled during job. But, they get back working as soon as you restart the machine. I've had the problem twice with this setup. Once with the Z-axis and once with the…
Bernard de Terwangne
  • 61
  • 3
3
votes
0 answers

How to get dual Z, dual Y steppers and dual endstops working on Marlin?

I've been trying for days to get my BTT SKR2 board to work with both dual Y & Z-axis and independent end stops (2 per axis). The Y-axis does independent homing just fine no matter which way the gantry is aligned. On the Z-axis, however, two…
user1629336
  • 31
  • 3
3
votes
4 answers

I can't figure out how to name this problem or solve it

(Ender 3 Pro with Bigtreetech Board and Touchscreen, BlTouch) Hello everybody, I want to print something for my family but the hotend gets clogged every time in the same part of the print. I tried: Different Nozzles Different Filaments I cleaned…
Ericsonpsy
  • 61
  • 5
3
votes
1 answer

What UART port to use for RPi GPIO pins on an SKR v1.3 board

I have a Bigtreetech SKR v1.3, and I'm trying to connect a Raspberry Pi to the board using the RPi's GPIO pins as opposed to using a USB connection because space is limited within the case of CR10S Pro. I watched this youtube video where he explains…
ipatch
  • 131
  • 1
  • 5
3
votes
0 answers

Connecting 128x64 OLED to BIGTREETECH SKR mini E3

I'm trying to connect a 128x64 OLED display with the SH1106 driver for the BIGTREETECH SKR mini E3 printer controller board which uses the 32 bit STM32f103RC MCU. Note that it works fine with my RAMPS 1.4 board but when I compile it on PlatformIO…
Oliver
  • 39
  • 2
3
votes
0 answers

How do I install the USB drivers for Bigtreetech's SKR Mini E3 v1.2?

I want to install the USB drivers for the BIGTREETECH SKR Mini E3 v1.2 from the GitHub page but I don't know how to proceed. Any help will be greatly appreciated.
Liam
  • 679
  • 4
  • 12
  • 20
2
votes
1 answer

How to connect Arduino Uno R3 to Bigtreetech SKR Mini E3 V3

I can't seem to find wiring diagrams anywhere, so I am asking here. Which pins do I use to connect my Arduino Uno to my Bigtreetech board? I am connecting the Arduino to use it as an ICSP programmer, so that you can flash the BigTreeTech board. I…
Duncan McPherson
  • 23
  • 5
2
votes
1 answer

Adding a TMC2209 driver to BIGTREETECH SKR mini E3 V3.0 control board using Marlin

I haven't started on the hardware for this project yet as I'm still waiting for delivery, but I would just like to sense-check my current software mods and hardware plans to see if I'm along the right lines. I am going to take the BIGTREETECH SKR…
eng_giraffe
  • 21
  • 1
2
votes
1 answer

Possible to get G34 auto align and IDEX with Ender 3 Pro and BTT E3 RRF?

Long story I'll try to bullet point to speed up so bear with me: I have a heavily modded Ender 3 Pro Relevant mods for this question: Control board swapped for BTT E3 RRF, Dual Z motor, BLTouch Ultimately I'd love to convert the Ender 3 pro to have…
Joseph Crozier
  • 380
  • 5
  • 17
2
votes
2 answers

Why would all of the Ender 5 Pro's axis motors (X, Y and Z) stop being able to move (all at once)?

I have a Creality Ender 5 Pro which has been working properly for some time. During my last print, the axis motors just suddenly stopped working while the extruder motor continued to work properly. In fact, when I connect the extruder motor wire to…
Mahlomola Daniel Cwele
  • 51
  • 5
2
votes
1 answer

Z banding issue

I'm currently facing a Z banding issue that frustrates me more and more. My printer is a modified Anycubic I3 Mega. Customizations: Mainboard: Bigtreetech SKR 1.4 Turbo Stepper Drivers: TMC 2208 v3 Hotend: E3D Titan Aero Hotbed: 5 mm aluminum base…
zero695
  • 31
  • 4
1
2 3